if you have existing H.323/SIP room systems such as Cisco, Polycom or Lifesize, you can do one of the following:
- Subscribe to Zoom Cloud Room Connector and use the existing H.323/SIP system, or
- Upgrade to the new Zoom Rooms specifications by simply adding a few new components and leveraging most of your existing components.
- Displays (TV)
- HDMI Transmitters/Receivers
- Cat5e/Cat6 structured cable runs
- Audio Systems
- DSP (tuning is recommended for optimal performance with Zoom)
Optional Wired HDMI for Content Sharing
- Mac Computer & Accessories
- PC Computer & Accessories
Controller & Accessories
Cables & Supplies
- 2 Pulse-Eight USB to HDMI CEC Adapter (TV with CEC)
- 2 Lindy CEC HDMI Adapter (F to M) (TV with CEC)
- Anker 7-port USB 3.0 Hub for CEC Adapter (2)
- 2 6ft HDMI cable
- Lightning to USB (10feet)
This is the laptop content typically coming from an HDMI transmitter at a table location. At the codec side, it will be an HDMI receiver or other component to output the laptop signal to an input on the codec.
This is typically codec output 1.
This is typically codec output 2
Traditional VTC systems will utilize proprietary cameras with a CAT5e/CAT6 extension system. This indicates the Camera side of the extender system.
Traditional VTC systems will utilize proprietary cameras with a CAT5e/CAT6 extension system. This indicates the Codec side of the extender system.
This is a mic/line output from an audio digital signal processor that would feed the input of the codec.
This is a mic/line input to an audio digital signal processor that would be fed from the output of the codec.
New Zoom Rooms Configuration:
PC (Dell Optiplex 7050 Micro):
Existing H.323/SIP Room Systems:
Polycom Group Series: