At Zoom, we are hard at work to provide you with the best 24x7 global support experience during this pandemic. As part of this ongoing commitment, please review our updated Support Guidelines.

SIP/H.323 in-meeting menu Follow

Overview

When you join a Zoom meeting from your H.323 or SIP device via the Cloud Room Connector, you can access the Zoom menu by DTMF tones to control your video layout, start/stop your video, mute/unmute, and more.

This article covers:

Prerequisites

Main menu

Accessing the main menu

To access the main menu while in a Zoom meeting, Press 1 via DTMF tones to access the menu. On some devices, you will need to toggle your remote to send DTMF tones.

  • Polycom: Press # to activate the keypad for DTMF tones
  • Tandberg: Press # to activate "Touch Tones"
  • Lifesize: Press  to toggle between presets and DTMF mode
  • Sony: Press * to activate DTMF mode, Enter to exit (microphone will not be active in DTMF mode).
  • Aver: Press Far/Near button on remote control to toggle between camera presets and DTMF mode

Main menu options

Once the main menu opens, using your remote:

  • Press 1 to change the video layout. Learn more about changing the video layout.
  • Press 2 to unmute your microphone.
  • Press 4 to start or stop your camera feed.
  • Press 5 to start or stop recording.
    Note: you will need to be the meeting host to record. Learn more about joining as the meeting host.
  • Press 6 to show the participants list. 
  • Pressto view the Meeting Host Options
    Note: If the Host Key was not entered before joining the meeting, you will be prompted to enter the Host Key before accessing this menu.
  • Press 8 to enable Language Interpretation to listen to interpretation audio channels and view interpreted text
  • Press 0 to view additional options.
  • Press * to close the menu.

Additional options

While in the Main Menu, you can press 0 to access an additional options menu. Once in the additional options menu, using your remote:

  • Press 1 to change Dual Screen Mode. This sends a single stream of content over the video channel instead of sending both content and video. You can use this if you are unable to receive video and content simultaneously to toggle between them.
    Note: This option also needs to be enabled if you are utilizing dual-screen video feeds.
  • Press 2 to show or hide names on the participants' video feeds.
  • Press 3 to mute participants upon entry.
    Note: you will need to be the meeting host to mute participants upon entry. Learn more about joining as the meeting host.
  • When you're in Gallery View, if not all participants appear on one screen, press 4 to go to the previous screen of participants.
  • Press 5 to show or hide non-video participants.
  • When you're in Gallery View, if not all participants appear on one screen, press 6 to go to the next screen.
  • Press 7 to show or hide the chat messages from appearing on the display.
  • Press 8 to show or hide closed captioning. 
  • Press 9 to show or hide the active speaker window when viewing screen share content.
  • Press * to close the menu.

Host options

While in the Main Menu, you can press 7 to access options available to the Host. You will need to join the meeting using the host key to utilize the options. If the Host Key was not entered when joining the meeting, you will be prompted to enter the Host Key when accessing the host menu.

The Host options include:

  • Press 1 to lock or unlock the meeting.
  • Press 2 to show or hide names on the participants' video feeds.
  • Press 3 to start or stop recording.
  • Press 4 to mute participants upon entry.
  • Press 5 to end the meeting.
  • Press 6 to mute all participants.
  • Press 7 to unmute all participants.
  • Press * to close the menu.