H.323/SIP Menu Follow

Overview

When you join a Zoom meeting from your H.323 or SIP device via CRC, you can access the Zoom menu by DTMF tones to control your video layout, start/stop your video, mute/unmute, and more.

Prerequisites

Instructions

  1. Press 1 via DTMF tones to access the menu.
    On some devices, you will need to toggle your remote to send DTMF tones.
    • Polycom: Press # to activate the keypad for DTMF tones
    • Tandberg: Press # to activate "Touch Tones"
    • Lifesize: Press lifesize_rc_tt_button.jpg to toggle between presets and DTMF mode
    • Sony: Press * to activate DTMF mode, Enter to exit (microphone will not be active in DTMF mode).
    • Aver: Press Far/Near button on remote control to toggle between camera presets and DTMF mode
  2. This will pull up the menu. 
    IMG_0098.PNG
    • 1: Press 1 to change the video layout. Learn more about changing the video layout.
    • 2: Press 2 to mute or unmute your microphone.
    • 4: Press 4 to start or stop your camera feed.
    • 5: Press 5 to start or stop recording. Note: you will need to be the meeting host to record. Learn more about joining as the meeting host.
    • 6: Press 6 to show the participants list. 
    • 0: Press 0 to view additional options.
    • *: Press * to close the menu.
    • Additional Options: If you press 0 to access additional options, the following menu will appear: 
      IMG_0099.PNG
      • 1: Press 1 to change Dual Screen Mode. This sends a single stream of content over the video channel instead of sending both content and video. You can use this if you are unable to receive video and content simultaneously to toggle between them.
      • 2: Press 2 to show or hide names on the participants' video feeds.
      • 3: Press 3 to mute participants upon entry. Note: you will need to be the meeting host to mute participants upon entry. Learn more about joining as the meeting host.
      • 4: When you're in gallery view, if not all participants appear on one screen, press 4 to go to the previous screen of participants. 
      • 5: Press 5 to show or hide non-video participants. 
      • 6:When you're in gallery view, if not all participants appear on one screen, press 6 to go to the next screen. 
      • 7: Press 7 to show or hide the chat messages from appearing on the display.
      • 8: Press 8 to show or hide closed captioning. 
      • *: Press * to close the menu.
Was this article helpful?
Have more questions? Submit a request