Configure Meeting Connector Controller in Public or DMZ with end-to-end encryption Follow

The following is an example of configuring your Meeting Connector (MC) Controller using a public IP outside of the firewall or in a DMZ with end-to-end encryption support.

End-to-end encryption requires that each MC Controller has two IP addresses, which will be configured as an IP alias on the Network Interface Controller (NIC) once the configuration below has been saved and the VM has been rebooted. Please make sure that the second IP address has been reserved for this VM.

One Meeting Connector Controller (350 participants)

Your network information:

External IP address (assigned to MC): 173.228.57.201
Second IP address (for MC alias): 173.228.57.202
Subnet mask: 255.255.255.0

Firewall Setup:

N/A

Controller Configuration:

 

Two Meeting Connector Controllers (700 participants)

Your network information:

External IP address (assigned to MC-1): 173.228.57.201
Second IP address (for MC-1 alias): 173.228.57.202
External IP address (assigned to MC-2): 173.228.57.203
Second IP address (for MC-2 alias): 173.228.57.204
Subnet mask: 255.255.255.0

Firewall Setup:

N/A

Controller 1 Configuration:

Controller 2 Configuration:

 

Was this article helpful?
Have more questions? Submit a request
Powered by Zendesk