Revolabs UC1000/1500 integration with Zoom Rooms Follow

Summary: 

Revolabs UC1000/1500 integration allows synchronization that is reflected equally across both the Revolabs UC1000/1500 as well as the Zoom Room iPad controller. With this synchronization, you can perform the following features that both devices will support during a Zoom Room meeting. 

  1. Mute/Un-Mute (Zoom Rooms controller, Revolabs) 
  2. Volume Slider (Zoom Rooms controller)
  3. Increase or decrease volume on speaker (Revolabs)
  4. Set the highly reverberant room option (requires Firmware 2.7 and higher)

Settings on the Revolabs 1000/1500 (will need to have a “Dialer” connected to the FLX UC1000/1500)

How to:

Changing USB Configuration

1. Press the “Menu” button on the dialer and go to “Settings”

2. Select the “Admin Settings” and enter the password (default pw “7386”)

 3. Go into “USB Settings”

4. Set USB settings to “Always Enable”

Retrieve IP address for firmware update

1. Press the “Menu” button on the dialer and go to “Settings”

2. Select the “Admin Settings” and enter the password (default pw “7386”)

3. Go into “IPv4”

4. Write down the “IP Address” of the unit

 

Download:

Installation:

1. Open a browser

2. Enter IP address of FLX UC1000/1500

3. Enter the password to gain access to the Revolabs FLX unit (default pw “7386”)

4. Mouse over “tools” option and select the “update” option

5. Drag and drop the firmware file to the box


6. Click “Update firmware” to begin the firmware update.

7. Upon reboot, Click Advanced Audio and select the Room Size, Keep Voice Enhance and Check Highly Reverberant Room 

Room_Size.png

Was this article helpful?
Have more questions? Submit a request
Powered by Zendesk