Zoom Rooms ProAV (All Hands Space) Follow

Zoom Rooms can work with new or existing ProAV equipments.  For a large conference room or all-hands open space that sits 30+ people, we recommend four Shure wireless ULX-D microphones (two lavalier and two handheld) along with a QSC amplifier, QSC ceiling speakers and a QSC Digital Signal Processor that connects to the Zoom Rooms PC or Mac.  Audience engagement is via wireless handheld with no open ceiling microphones. 

The environment will be a two-output environment distributed throughout the space with two primary displays, an 85" for content and a 65" for video participants.  A pole mount with two 55" confidence monitors will show the same content and video participants. Content may be distributed on repeat monitors throughout the space. 

The audience-facing camera will be mounted below the video participants on the primary wall and the presenter-facing camera will be mounted below the confidence monitors to replicate eye contact with video participants and in-room participants.  Wireless presenter microphones will be the primary audio for voice lift in the space and Zoom input audio.  Zoom audio from the far end and content share will be heard over ceiling mounted speakers. 

Note: ProAV room requires certified ProAV integrator or Zoom PSO to design and deploy.

All_Hands_Presenter_Mockup_v2.pngAll_Hands_Rear_Mockup_v2.png

 

Equipment List:

Primary Displays

Repeat Displays

Confidence Monitors

Presenter Camera

Audience Camera (Mounted Below or Above Primary Displays)

Video DA/Transmission

Audio Components

CPU Options

Controller & Accessories

Room Scheduler & Accessories (Optional)

Equipment Rack

Cables & Supplies

Pictorial Diagram:

Pictorial_Schematic_-_Pro_AV_-_All_Hands_v2.0.png

Functional Diagram:

Functional_Diagram_-_All_Hands.png

 

Configurations:  

 

Was this article helpful?
Have more questions? Submit a request