Yealink Assisted Provisioning Guide Follow

Overview

If you are having issues with zero touch provisioning or your phone doesn't support it, follow the sections below to provision a supported Yealink phone.

Note: Before provisioning, make sure to do the following. 

This article covers:

  1. Accessing the Phone's Web Interface
  2. Configuring Provisioning Server

Prerequisites

Accessing the Phone's Web Interface

Note: Screenshots in this section apply to T4 and T5 series phones. Your phone's interface may be different.

  1. Access the phone's main menu:
    • T4 series without touchscreen: Press the button associated with Menu
    • T4 series with a touchscreen: Tap Menu on the home screen.
    • T5 series with a touchscreen: Swipe left from the home screen.
  2. Navigate to the status screen.
    • T4 series without touchscreen: Use the phone's directional pad to select Status.
    • T4 series with a touchscreen: Tap Status.
    • T5 series with a touchscreen: Tap Settings > General.

  3. Make note of the IPv4 address.
    • T4 series without touchscreen

    • T4 series with a touchscreen

    • T5 series with a touchscreen

  4. Open a web browser on a computer that's connected to the same network as the phone.
  5. Enter the phone's IP address.
  6. Log in to the phone's web interface as an admin.
    Note: The default admin username and password is admin / admin. If you do not know your username or password, contact the vendor of the phone.

Configuring Provisioning Server

Note: Older Yealink devices may have a slightly different web interface that has the green header bar.

  1. Navigate to the Settings > Auto Provision.

  2. Enter the provisioning URL in the Server URL field. You can find your phone's provisioning URL in the list of supported devices.

    Alternatively, you can enter the provisioning URL as follows: https://provyp.zoom.us/api/v2/pbx/provisioning/Yealink/<phone_model>
    You must change <phone_model> accordingly in the above URL. The model name must be in lowercase with no spaces. See the supported devices for a list of models and provisioning URLs. 
  3. Delete any data in the User Name and Password fields.
  4. Click Confirm to save the configuration then click Auto Provision Now to apply the configuration to your phone. Your phone will reboot several times to complete provisioning.

Note: Make sure you don't have another provisioning server communicating with the device when you try to complete provisioning.

Was this article helpful?