Shure P300/MXA310/MXA910 Mute Sync Follow

Shure P300 - Enabling Mute Status Sync

Upgrading to the latest P300 firmware will allow the Zoom Rooms software to sync the mute status and LEDs with Shure's MXA310 and MXA910 microphones.

Prerequisites:

  • Running Zoom Rooms 4.1.5 or later
    • Windows or Mac Only
  • P300 Running firmware v3.1.5
    • MXA310 or MXA910 microphones 

Instructions:

  1. Download the Shure Update Utility
    • Any updates available for Shure devices will populate.  Verify P300 is showing "Version to Install" as "3.1.5" Run the software and click "Send Updates..."
    • Shure P300 Firmware Release Notes
  2. Use the Shure Web Device Discovery Application to navigate to the web UI of the Shure P300. 
    • Navigate to the "Inputs" configuration page
      • Screen_Shot_2019-01-09_at_10.08.37_AM.png
    • At the bottom of the channel strip, click "enable logic"
      • Screen_Shot_2019-01-09_at_10.08.47_AM.png
  3. To enable muting via the button on the MXA310, use the Shure Web Device Discovery Application to navigate to the web UI of the Shure MXA310. 
    • Navigate to the "Button Control" configuration page
      • Screen_Shot_2019-01-09_at_10.12.14_AM.png
    • On the right side under "Button Properties" make sure that "Mute Control Functions" is identified as "Logic out"
      • Screen_Shot_2019-01-09_at_10.15.07_AM.png

Additional Resources:

Was this article helpful?
Have more questions? Submit a request